Let's talk about the structure function of the centrifuge. Let's take a look.

The separate machine is composed of the fuselage, the transmission device, the drum, the liquid collecting disk the liquid inlet bearing seat. The upper part of the drum is the flexible main shaft the lower part is the damping floating bearing. The main shaft is connected with the passive wheel by the connecting seat buffer. The motor transmits the power to the passive wheel through the driving wheel the tensioning wheel, then makes the drum rotate around its axis at high speed, forming a strong mental force field. The material is injected the bottom inlet, the centrifugal force forces the material to move upward along the inner wall of the drum, the material is stratified due to the density difference of different components of the material.

The separators are mainly used to separate materials that are difficult to separate. Therefore, it is necessary to use a centrifuge to generate strong centrifugal force. Due to the effect of the gravity field, the suspended particles will gradually sink, whereas the particles with smaller density than the liquid will float upward. Heavy light liquids move upward along the axis of the drum, are related to the strength of the gravity field the viscosity of the liquid. Their settlement process can be observed under the effect of general gravity. The dispersion is unconditional under the effect of centrifugal force. The smaller the particles are, the more serious the dispersion is. Only when they are subjected to external forces can they move. Under the effect of centrifugal force. For particles smaller than a few microns, such as viruses proteins, it is impossible to observe the sedimentation process only by using gravity. The lighter liquid phase forms the inner liquid ring, the solid phase materials deposited on the wall of the drum form the sediment layer, the sediment on the wall of the drum is unloaded manually after the shutdown.

Here is the function introduction of the centrifuge. After the above description, we hope to bring more help to us. The centrifuge manufacturer will also give you more knowledge in this respect!